- Oxy-all is a concentrate disinfectant for use in water systems and industrial facilities to disinfect water, air and surfaces.
- Outstanding effectiveness combined with active substances that are harmless to health (when diluted correctly) making Oxy-All an excellent product.
- Oxy-all is the preferred product choice for: drinking water, legionella prevention, food and beverage industries, water tanks, swimming pools, jacuzzi and spa, small cooling and water circuits.
- Effective against bacterial endospores, bacteria, biofilms, yeasts, fungi and viruses.
Direction for use and dosages:
For air disinfection:
75 mL Oxy-All to 925 mL water to combat bacteria, viruses, yeast and fungi (low degree contamination). Apply the dilution with ULV fog sprayer (spray approx. 15 mL/m3) then let it dry and no entry for 60 minutes.
For surfaces disinfection:
100 mL Oxy-All to 900 mL water to combat bacteria, viruses, yeast and fungi (medium degree contamination).
200 mL Oxy-All to 800 mL water to combat bacteria, viruses, yeast and fungi (high degree contamination).
375 mL Oxy-All to 625 mL water to combat mold, bacteria, yeast and fungi (very high contamination).
500 mL Oxy-All to 500 mL water to combat bacterial endospores.
Apply the dilution with sprayer or a mop on the surface then let it dry. Rinsing is not required.
Pipeline and tank disinfection:
3.2L/m3 for a shock dose. Leave the disinfectant solution for 12-24 hours, then dispose the solution off in the sewage system.
Pipeline and tank disinfection:
2L/100L for a treatment dose. Leave the disinfectant solution for 30 minutes, then dispose the solution off in the sewage system.
Water disinfection for cooling towers, air washers and irrigation systems:
80-320 mL/m3. Leave the disinfectant solution for 15 minutes to 12 hours, then dispose the solution off in the sewage system.
Swimming pools, jacuzzi and spa disinfection:
200 mL/m3. Use peroxide strips to measure the quantity of Oxy-All solution (30 ppm).
Drinking water disinfection:
Upper limit for the Oxy-All solution on any tap outlet should not exceed 100mL/m3.
Use peroxide strips to measure the quantity of Oxy-All solution (15 ppm).
Warnings and cautions:
Do not breathe spray or mist. Keep out of reach of children. Causes moderate eye irritation. If irritation happens, rinse eyes gently with water for 15 – 20 minutes. Wash with soap and water after handling.